Solid Carbide Taps for Stainless Steel
Raw Material:Super material is the basis of the tools. We choose the high performance material with good wear-resistance, high hardness and high toughness.
Excellent Coating:Good coating can improve tools life and production efficiency, as well as solve the cutting problems.
- Description
- Inquiry
Customised Solid Carbide Forming Drill And Taps For Stainless Steel
Raw Material:Super material is the basis of the tools. We choose the high performance material with good wear-resistance, high hardness and high toughness.
| HRC45 | HRC55 | HRC60 | HRC65 |
| YG10X | YG10.2 &WF25(Taiwan) | K44 & K40 (German) | H10F (Sweden) |
| Grain Size:0.7um | Grain Size:0.6um | Grain Size:0.5um | Grain Size:0.5um |
| Co:10 % | Co:10 % | Co:12 % | Co:10 % |
| Flexural strength:3320N/mm2 | Flexural strength:4000N/mm2 | Flexural strength:4300N/mm2 | Flexural strength:4300N/mm2 |
Excellent Coating:Good coating can improve tools life and production efficiency, as well as solve the cutting problems.
| Coating Process Parameters | ||||
| Item | AITin | TiAIN | TiSiN | nACo |
| Hardness(HV) | 3200 | 2800 | 3600 | 42(GPA) |
| (Thickness(UM) | 2.5-3 | 2.5-3 | 3 | 3 |
| Oxidation | 900 | 800 | 1000 | 1200 |
| Friction | 0.3 | 0.3 | 0.45 | 0.4 |
| Color | Black | Violet | Copper | Blue |
Performance Comparison Of Taps
| Classification | Performance | Characteristic | Purpose |
| Straight Flute Tap | Lower debris discharge, through hole | Right angle groove | Cutting continuous curved material |
| No chip clogging | Holes with axial grooves in the inner wall | ||
| High flexural damage strength | Through hole processing | ||
| Strong cutting ability | High Speed Machining | ||
| Spiral Tap | Upper debris discharge, blind hole | Right angle groove | Cutting continuous curved material |
| Tappable to the lowest part of blind hole | Holes with axial grooves in the inner wall | ||
| Good chip removal effect | Blind hole processing | ||
| Easy to get into the bottom. | |||
| Easy cutting |
Capillary Stainless Steel Tubes Seamless Stainless Tubes & Pipes
Welded Stainless Tubes & Pipes Nickel Alloy Tubes & Pipes
EN10305-1/4 Seamless Steel Tubes EN10305-2/3 Welded Precision Tubes
ISO8535-1 Fuel Injection Tubes Single/Double Wall Bundy Tubes
Seamless Honed/SRB Tubes & Pipes A210/A179 Boiler & Pressure Tubes
Related Products
Non-standard Carbide Drills
Raw Material:Super material is the basis of the tools. We choose the high performance material with good wear-resistance, high hardeness and high toughness.
Excellent Coating:Good coating can improve tools life and production efficiency, as well as solve the cutting problems.
Special T-slot Solid Carbide End Mills
Features:
1.Adopt double edge belt with core, large spiral Angle and groove design. Edge grinding, not only sharp, but also more wear – resistant, not easy to collapse blade
2.The tool is made of tungsten carbide, which is strong and durable, and is not easy to break, greatly improving the service life of the tool
3.Advanced coating technology to prevent rust and high temperature resistant
4.Customised high quality packaging box, ensure the tool intact to the customersCustomised Carbide End Mill
1. Special Cutting Edge: Special cutting edge can increase the cutting ability. The lifetime of tools and machines will be longer
2. Smooth And Wide Flute: Smooth and wide flute will remove the cuttings more easily
3. Heat-resistant Coating: With highly heat-resistant HELICA coating, can be used for high-speed processing
4. Bronze Coating: Under bronze coating, any abrasion is easy to be recognized
5. High Quality Raw Material: The raw material is used of high toughness, grain-sized carbon tungsten
6. Polished Surface Treatment: With high polished surface treatment, reduce the friction coefficient could be reduced, the lathe efficiency could be improved, more production time could be saved
2 flutes carbide end mill
Special Carbide T-slot 6 Flute End Mill
1. Special Cutting Edge: Special cutting edge can increase the cutting ability. The lifetime of tools and machines will be longer
2. Smooth And Wide Flute: Smooth and wide flute will remove the cuttings more easily
3. Heat-resistant Coating: With highly heat-resistant HELICA coating, can be used for high-speed processing
4. Bronze Coating: Under bronze coating, any abrasion is easy to be recognized
5. High Quality Raw Material: The raw material is used of high toughness, grain-sized carbon tungsten
6. Polished Surface Treatment: With high polished surface treatment, reduce the friction coefficient could be reduced, the lathe efficiency could be improved, more production time could be saved
Solid Carbide Multi-step Reamer Tools
Raw Material:Super material is the basis of the tools. We choose the high performance material with good wear-resistance, high hardness and high toughness.
Excellent Coating:Good coating can improve tools life and production efficiency, as well as solve the cutting problems.
Solid Carbide Ball Nose End Mill
Raw Material:Super material is the basis of the tools. We choose the high performance material with good wear-resistance, high hardness and high toughness.
Excellent Coating:Good coating can improve tools life and production efficiency, as well as solve the cutting problems.
Special Carbide End Mill
Advantages: Suitable for finishing,can achieve the mirror effect.
ALTIN coating from Japan, increase surface gloss,and prolonging life.100% quality guarantee (ISO9001)
Work material: carbide steel, alloy steel, cast iron, copper, mould steel,etc.100% original tungsten, without recycle parts.
Wc90%, Co10%, more cobalt will make end mill more crisp
Non-Standard Solid Carbide End Mills
Raw Material:
Super material is the basis of the tools. We choose the high performance material with good wear-resistance, high hardeness and high toughness.Excellent Coating:
Good coating can improve tools life and production efficiency, as well as solve the cutting problems.
