Long Neck Solid Carbide End Mill
Common end mill length is composed by two parts, cutting flute length and shank length, the cutting flute diameter is very small, below 1mm or 1-3mm, smaller than shank diameter (shank is 4mm or 3.175mm), there is one cone section length connecting the small diameter and shank, we call it neck. The long neck has a long neck as the name indicates, the long neck can avoid the interference between end mill and the workpiece, which is the very important point when mill a deep groove, so the long neck end mill is very good for deep groove milling, also named Deep Groove End Mill.
Solid Carbide Single Flute End Mill
Raw Material:Super material is the basis of the tools. We choose the high performance material with good wear-resistance, high hardness and high toughness.
Excellent Coating:Good coating can improve tools life and production efficiency, as well as solve the cutting problems.
Solid Carbide Coated 6 Flute End Mill
Raw Material
Super material is the basis of the tools. We choose the high performance material with good wear-resistance, high hardeness and high toughness.
Excellent Coating
Good coating can improve tools life and production efficiency, as well as solve the cutting problems.
Micro Square End Mill
Micro Square End Mill
Double-edge design improves rigidity and surface finish effectively.Cutting edge over the center reduces the cutting resistance.
Suitable workpiece: suitalbe for silver & Gold& Cooper& Brass &Jewelry machining, also suitable for Carbon steel, Alloy steel, pre-harden steel and harden steel